<< 75
Multimedia
6. Click on the checkmark boxes (to the left of the song entry) to select the
song you want to synchronize to your handset.
7. Click the Start Sync button at the lower right corner of the application to
download the selected songs to your handset. A “synchronization in
progress” message appears on the application. Do not unplug the handset
during this process. Once complete, a Music folder appears below the
CU920 Music Sync Player on the right of the Sync tab.
8. It is now safe to unplug the USB connector from the handset.
Importing a Playlist from a 3rd Party Application
1. Open Windows Media Player on your computer (version 10.0 or higher).
2. Use the USB adapter cable to connect the handset to the target PC. When
you try to connect handset on your PC, the handset displays “Connecting
as Music Sync...”.
3. Once the USB connection has been established, the handset displays "
Connected as Music Sync Mode. Do not disconnect during transfer. " and
the computer screen then shows the CU920 device.
n Note
If the target computer does not detect the newly connected handset or provide an
MTP Player dialog window on the PC screen, please follow steps 6 - 10 from the
previous "Transferring Music from the Digital Music Stores" .
4. From within the Windows Media Player application, click on the Library tab.
5. From the left side of the Library tab, click on All Music. The right side of the
page is then populated with all of the songs which the player has previously
found.
6. Right click on the song entry and select, Add to.. > Additional Playlists.
7. From the Add to Playlist dialog, click the New button and type in a unique
playlist name.
8. Click OK when you are done entering the new playlist name. The new
Windows Media playlist is then displayed within the My Playlist section of
the Library tab (left side).
To Next Page
Loading...
