LG W2242T User Manual

Press the button to reset immediately.
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Restore all factory default settings except
"LANGUAGE."
SETUP
S E T U P
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
-
+
- The 22 inch monitor is 720x400,1280x768,1360x768, 1680x1050
The input signal which the ARC does not support the 'ORIGINAL'
is the following.
- The 19 inch monitor is 720x400,1280x768,1360x768, 1440x900
- The 20.1 inch monitor is 720x400,1280x768,1360x768, 1680x1050
4:3 IN WIDE
To select the image size of the screen.
WIDE
4:3
Resolution Screen ratio
1280x1024
1152x864
1024x768
800x600
640x480
720x480
5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
* 4:3: Depending on the input video signal ratio,
it is automatically changed to an optimized screen
ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
A14

LG W2242T Specifications

General

Pixel pitch	0.282 x 0.282 mm
Aspect ratio	16:10
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (typical)	-
Display brightness (typical)	250 cd/m²
Special features	sRGB, HDCP, Flatron f Engine, Intelligent Auto, Auto resolution, 4:3 in Wide (ARC)
Power requirements	90 – 264 Vac, 47 – 63 Hz
Display viewable area (HxV)	473.86 x 296.16 mm
HDCP	Yes
Certification	TÜV-Typ, CE, EPA Energy Star, UL, CSA, SEMKO, FCC-B, TCO03
Product color	Black
Compliance industry standards	DDC 2B
LED indicators	Stand-by
Tilt angle range	-5 - 20 °
Panel mounting interface	75 x 75 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	22 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	210 mm
Height (with stand)	418 mm
Weight (with stand)	4700 g
Depth (without stand)	63 mm
Width (without stand)	516 mm
Height (without stand)	346 mm