24
How to use washer
■ Child Lock
■ Beep On / Off
Select this function to lock the buttons on the control assembly to prevent tampering.
“Child Lock” can be set only during the washing cycle.
The Beep on/off function can be set only during the washing cycle.
Locking the control panel
1.
Press the Medic Rinse and Pre Wash
simultaneously for 3 seconds.
2. A beeper will sound, and ' ' will appear on
the LED display.
When the child lock is set, all buttons are locked
except the Power button
•
Turning off the power will not reset the child
lock function. You must deactivate child lock
before you can access any other functions.
NOTE
• If you want to turn the Beeper off, simply
repeat this process.
NOTE
1. Press the Power button.
2. Press the Start/Pause button.
3. Press and hold the Time Delay and Crease
Care button simultaneously for three seconds
to set Beep on/off function.
Once the Beep on/off function is set, the setting
is memorized even after the power is turned off.
Unlocking the control panel
1.
Press the Medic Rinse and Pre Wash
simultaneously for 3 seconds.
2. A beeper will sound and the remaining time
for the current programme will reappear on
the LED display.
To Next Page
Loading...
Need help?
General
