23
How to use washer
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
NOTE
1. Press the Power button.
2. Select a cycle.
3. Press the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
The cycle chosen determines the amount
of Rinses and their duration as well as the
spin during for this function.
1. Press the Power button.
2. Select the spin speed only.
3. Press the Start/Pause.
Rinse+Spin
• Medic Rinse : For best results or for
cleaner rinsing. Medic Rinse is a 40
degree final rinse.
• Rinse+Spin : This can be helpful in
preventing fresh stains from setting in
fabrics. This is a separate cycle.
• Time Save : This option can be used to
reduce the time of a wash program.
It is best used on lightly soiled loads.
• Intensive : If a normal load is heavily
soiled, “Intensive” option is effective.
Option
• Rinse
+
+Hold : Adds one more rinse to
the wash, then after rinsing process, the
course is paused until start button is
pressed again.
• Normal+Hold : The course is paused
until start button is pressed again when
rinse is finished.
• Rinse
++
: Adds 2 rinses.
• Rinse
+
: Adds 1 rinse.
Rinse
• By pressing the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature selection is limited in
certain programs.
Temp.
Spin Only
■ Options ■ Other functions
To Next Page
Loading...
