20
Control Panel
Power Button
•
Press the
Power
button to turn the washing
machine on.
Start/Pause Button
•
This
Start/Pause
button is used to start the
wash cycle or pause the wash cycle.
•
If a temporary stop of the wash cycle is needed,
press the
Start/Pause
button.
Display
•
The display shows the settings, estimated
time remaining, options, and status messages.
When the washer is turned on, the default
settings in the display will illuminate.
•
The display shows estimated time remaining.
While the size of the load is being calculated
automatically, the display will blink before
displaying the estimated cycle time.
Programme Knob
•
Programmes are available according to laundry
type.
•
Lamp will light up to indicate the selected
programme.
Options
•
This allows you to select an additional
programme and will light when selected.
•
Use these buttons to select the desired
programme options for the selected cycle. Not
all options are available with each programme
cycle. Refer to page 23 for the available option
combinations..
To Next Page
Loading...
