20
3) Models with Speedy Soak Process
▶ Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation (Except for water level, water temp).
Water temperature button
(option)
Water level button
(indication of detergent amount)
• Use to adjust the water level as required. The
appropriate amount of detergent is shown next to the
water level in the Water-Detergent diagram
• Water level is automatically selected for fuzzy (normal)
program.
The following settings are indicated as the button is
pushed Large Ex-Large Small Medium Large
• Use to select water temperature.
Pressing the button allows you to select
Cold
Warm (Hot&Cold) Hot Cold
respectively. Default setting is Cold.
Child lock function
Use to lock or unlock the control buttons to prevent
settings from being changed by a child.
To lock, push the PROCESS and PROGRAM buttons
simultaneously and to unlock push them one more time
during the washing process.
Process button
• Use to select Speedy soak,
Wash, Rinse and Spin functions
as desired.
Note
The control panel may differ according to different models
To Next Page
Loading...
Need help?
General
