10
TEST OPERATION
1
Preparation for
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the Start/Pause
button.
• Listen for a click to determine if
the door has locked.
6
Check the water
temperature.
• Press the WASH/RINSE button
and the present temperature will
be displayed.
5
Check the automatic
reverse rotation.
4
Check the water supply.
•
Check if water is supplied
through the detergent dispenser.
7
Check the drain and spin
functions.
• Power off and the power on.
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain
functions.
8
Press the
START/PAUSE button.
9
Water removal.
• If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
2
Press the POWER button.
• Listen for a click to determine
if the door is unlocking.
7
• Check if the drum rotates
clockwise and counterclockwise.
To Next Page
Loading...
Need help?
General
