4. INSTALLATION & TEST
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
1
2
3
4
5
6
6
REMOVE THE SHIPPING
BOLTS
• Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove easily.
•
Turn the leveling feet to adjust
the appliance.
•
Turn clockwise to raise;
counterclockwise to lower.
•
Keep the shipping bolts and
spanner for future use.
•
Insert the 4 caps (provided)
into the hole.
ADJUST THE
LEVELING
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
8
To Next Page
Loading...
Need help?
General
