LG WM2240C series User Manual

E
N
G
L
I
S
H
Cleaning the water inlet filters
If the washer detects that water is not entering
the dispenser
, an error message will
show on the
display
. If you
live in
an area with hard water, this
may be caused by clogged inlet filters.
Turn off both water taps completely. Unscrew
the hot and cold water lines from the back of
the washer.
1
Carefully remove the filters from the water
inlets, and soak them in white vinegar
or a lime
scale remover
, following the
manufacturer’
s
instructions. Rinse
thoroughly
before reinstalling.
Press the filters back into place and reattach
the water lines. Do NOT operate the washer
without the inlet filters.
2
IMPORTANT:
Use extreme care when removing
and cleaning the filters. If the filters cannot be
cleaned or are damaged, do NOT operate the
washer without the inlet filters. Contact LG
Customer Service or a qualified LG service
person.
Inlet Filter
MAINTENANCE
C A R E A N D C L E A N I N G
IMPORTANT:
Use ONLY the inlet hoses provided
by LG with this laundry product. Aftermarket
hoses are not guaranteed to fit or function
correctly
. Other hoses
may not
tighten correctly
and could cause leaks. Subsequent damage
to
product or property will not be
covered under the
terms of LG’s warranty.
27

LG WM2240C series Specifications

General

Brand	LG
Model	WM2240C series
Category	Washer
Language	English