Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.
23
Noise Filter and Power Cord
① Remove the 2 screws attaching the noise filter.
② Disconnect both connectors in the noise filter.
Remove the power cord from the noise filter.
Pressure Switch
① Disconnect the leads from pressure switch and detatchthe pressure
switch from the machine.
②
Disconnect the pressure tube from the pressure switch.
Dispenser Housing & Inlet Valve
① Remove the hoses and Lead Wire from the input valve.
② Disassemble the Inlet valve and the dispenser housing.
2) Disassembly of the Noise Filter, Power
Cord, Inlet Valve, Pressure Switch, and
Dispenser Housing.
To Next Page
Loading...
