Shutdown status
Place the key switch in
the chassis position in
the boot state.
Place the key switch in
the platform position.
Place the key switch in the
platform position in the
boot state and press
“lifting” and “horn” button
at the same time.
Select the move function, and
then select the delay mode,
if necessary.
Raise or lower the
platform via the toggle
switch on the chassis
panel.
Press the dead man button
on the handle and move
the lever forward or backward
to control the speed.
Select lifting
mode.
Press the dead man button
on the handle and move
the handle forwards (lifting)
or backwards (lowering).
Stop status: due to the
ramp (LL display)
overload (OL) and
other alarms.
Power failure.
Adjust and make the
lift setting by the user.
To Next Page
Loading...
