3. Getting started
Once the device is properly installed on flat surface or in a rack you can turn it on. It does not
matter if the SDI cable is already plugged in nor should it matter if USB devices (sticks or drives)
are already connected to its front. If for some reason you after 3 minutes still haven’t gotten past
the bootup screen. Try unplugging all USB devices and restart the device (shut it off and turn it
back on).
3.1 Navigating the menus
The different menus and features can be accessed by using the buttons on both sides of the LCD
screens. There are five buttons:
- Arrow UP
- OK
- Arrow Down
- Home
- Arrow Back
The OK button is used to enter a menu or set a selected feature. The Back button takes you back
to the previous window. The up and down arrows are used to move the selection up and down
and the Home button takes you immediately back the the Main menu.
3.2 Screenshots of the menus
Bootup screen (picture 1)
Wait until the startup process is
finished and you reach the Main menu.
Bootup usually takes around 30 seconds but can take up to 1 or 2 minutes. Please wait that long
before trying to restart the device.
To Next Page
Loading...