Accessories kit
Accessories kit: Part
Number 9980-065
The instrument includes a standard accessories kit, which has accessories and some
replacement parts for your gas analyzer. The accessories kit includes the following
components:
Description Quantity Part Number
Universal power supply; Input: 100 to 240 VAC, 50 to 60 Hz;
Output: 12 VDC, 2.5 amps
1 591-13032
Outlet adapter kit for universal power supply 1 591-13033
USB cable; Standard 1.8 m USB-A to USB-B
a
1 392-06652
RS-232 null modem, cross-over cable kit
a
1 9975-016
14-pin terminal block; Includes label sticker (250-05340) 1 331-05273
Tube fitting nuts for air inlet and outlet 2 9861-036
Bev-a-line IV plastic tubing; 3.6 meter roll 1 222-01824
Air filters 2 9967-008
Quick-connect straight unions 2 300-03123
Cleaning kit 1 9980-066
3" Source and detector cleaning swabs 5 610-05314
5" Optical path cleaning swabs 5 610-05315
O-Rings (AS-018 Nitrile 70) 4 192-00226
Black polyurethane feet 4 234-02268
Air pump (optional)
An optional air pump is available for the gas analyzer. The pump (if applicable) is
installed in the gas analyzer case. If you want to add a pump, you can order one
later.
Display (optional)
An optional display is available. The display shows CO
2
concentration, H
2
O con-
centration (LI-850 only), bench temperature, and pressure.
a
The use of cables other than those provided may result in improper electrical performance.
Section 1. General description
1-3Accessories kit
To Next Page
