12
Set up the logging parameters.
Select Options from the Logging menu. Choose the File Header(s) to be output with the data,
the values to be logged, the field delimiter, and log frequency. Click OK.Choose Start from the
Logging menu.Enter a file name for the data file. Click Save.
13
Set up the charting parameters, if desired.
Select Charting from the View menu. Enter the value to be plotted, the Y-Axis min and max val-
ues, X-Axis max, and time units to be displayed on each plot. Click Start to begin recording data.
Graphs with data will appear in the window and data will be logged to the file designated in
Step 11 above.
14
Choose Stop from the Logging menu to stop recording when you are done collecting data.
Section 1
1-12 Section 1. General Description
To Next Page
Loading...
