Series 1
The Series 1 options are used to plot a chart with the Y axis on the left side of the chart. Choose
the value to be logged and set the maximum and minimum values for the Y axis.
Series 2
The Series 2 options are used to plot a chart with the Y axis on the right side of the chart.
Choose the value to be logged and set the maximum and minimum values for the Y axis.
X-Axis Max
Sets the maximum value for the X axis (Time). The units for the X axis can be seconds or
minutes.
Press Start at any time to view the chart layout and begin displaying data. Note that you must
press Stop to make changes to the chart parameters, and then press Start again to resume data
display.
3-17Section 3. Operation
Section 3
To Next Page
Loading...
