Liebert GXT3-5000/6000RT208
SL-23188_REV1_08-10 13 Guide Specifications
2.9 LIEBERT GXT3 CONFIGURATION PROGRAM
An included Microsoft Windows-based (Windows 95 or later) Configuration Program and cable shall allow
configuration of UPS features and operating parameters to meet specific application requirements, if required.
Options that are configurable via this program shall include:
Select one of five output voltages to match input voltages of 200/100, 220/110, 220/127, 230/115 or
240/120.
Enable / Disable Auto-Restart.
Select frequency converter operation with a fixed output frequency of 50 or 60Hz. Bypass is disabled
during Frequency Converter mode.
Set the Low Battery Warning alarm time from 2 to 30 minutes.
Disable the Auto-Battery test.
Set the Auto-Battery test interval to 7, 14, 21 or 28 days.
Select the number of external battery cabinets connected to the UPS to adjust the remaining run-time
calculations reported by the UPS Liebert software products.
Modify the shutdown setting of the Any Mode Shutdown.
To Previous Page
Loading...
