What to do if the rectifier fan fails on Liebert UPS System Power Supply?
If the rectifier fan of your Liebert Power Supply fails, it means that the rectifier fan is abnormal. Replace the fan in time and the UPS can recover automatically.
How to fix ambient over-temperature in Liebert Power Supply?
If your Liebert Power Supply indicates an ambient over-temperature, the UPS room might be too hot. Check the ventilation of the UPS room.
What to do if my Liebert UPS System Power Supply shows 'No battery'?
If your Liebert Power Supply shows 'No battery', it means the batteries are not connected. Check the battery and the wiring of batteries.
What causes bypass ratings to exceed the normal range in Liebert UPS System?
If the bypass ratings of your Liebert Power Supply exceed the normal range, it means that the bypass voltage or frequency exceeds the normal range and the bypass will not power the load anymore. Check the bypass voltage and frequency.
What causes battery over temperature in Liebert UPS System Power Supply?
If your Liebert Power Supply indicates a battery over temperature, it means that the battery temperature is too high. Check the battery temperature and ventilation.
What constitutes a user’s wrong operation on a Liebert UPS System?
If your Liebert Power Supply indicates a user’s wrong operation, it means that there was a wrong operation such as start the UPS with the maintenance bypass switched on. Operate with reference to User’s Manual.
Why does the Liebert Power Supply say the actual transfer times exceed the permissible transfer times per hour?
If the actual transfer times of your Liebert Power Supply exceed the permissible transfer times per hour, it means that transfer times exceed the times set by background. The system will stay in bypass mode until next hour. Avoid frequent overload.
Why is the battery self-test disabled on my Liebert UPS System?
If the battery self-test is disabled on your Liebert Power Supply, it means that the battery condition for self-test is not satisfied. Start the self test after the conditions can meet the requirements.
Why did my Liebert UPS System shutdown due to low bus voltage?
If your Liebert Power Supply shuts down due to low bus voltage, it means that the DC bus voltage is too low resulting in the shutdown of inverter. Check whether there is fault in rectifier side, if no, then check whether overload occurs. Restart after clearing the fault.
Why does my Liebert UPS System Power Supply transfer to bypass due to surge?
If the Liebert Power Supply transfers to bypass mode due to surge current, and back to inverter mode after load is decreased, it means that the system transfers to bypass mode due to surge current. Avoid applying load abruptly and the UPS can recover automatically.
General| Brand | Liebert |
|---|---|
| Model | UPS System |
| Category | Power Supply |
| Language | English |
Explains the UPS function, isolation transformer, and PWM technology.
Details the UPS modules: rectifier, inverter, bypass, etc.
Describes the UPS circuit diagram and power flow.
Identifies physical components and their arrangement within the UPS.
Covers various operational states: Normal, Battery, Bypass, ECO, Maintenance.
Highlights key features like Battery Management and Soft Start.
Lists technical parameters and performance metrics of the UPS.
Specifies recommended temperature, humidity, and site requirements.
Provides procedures for safely unpacking the UPS unit.
Details the physical size and outline specifications of the UPS.
Outlines methods for safely moving and handling the UPS.
Offers guidelines for correct placement of the UPS unit.
Describes options for routing input, output, and signal cables.
Details airflow requirements and clearance around the UPS.
Suggests arrangements for UPS and battery cabinets.
Guidance on choosing appropriate power and signal cables.
Instructions for connecting power and signal cables.
Details on how to connect a single UPS unit.
Step-by-step guide for powering on and starting the UPS.
Configuration options for UPS operational parameters.
Verifying UPS operation and features.
Overview of the UPS control panel and its components.
Explains how information is presented on the UPS display.
Details how to configure UPS operational parameters.
Describes user interaction prompts for confirmation.
Provides information on current and historical UPS events.
Covers initial configuration and startup steps for the UPS.
Details routine checks and upkeep for the UPS.
General approach and basic principles for resolving UPS issues.
Interpreting status lights for fault diagnosis.
Explains the meaning of audible alarm signals.
Diagnosing faults using messages displayed on the LCD.
Overview of parallel UPS configurations and their basics.
Steps for setting up parallel UPS configurations.
Details power supply requirements for parallel UPS systems.
Procedures for commissioning parallel UPS units.
Guidelines for operating a parallel UPS setup.
Information regarding battery selection and considerations.
Details on battery cabinet dimensions, installation, and wiring.
Information on the SNMP card for network management.
Describes software for monitoring UPS units via network.
Explains using MODEM for remote UPS management.
Details on the ambient temperature sensor and its connections.
Information on the lightning protection system.
Specifications for the bypass isolation transformer.
Troubleshooting UPS issues that occur without alarm indications.
Details the product warranty terms and conditions.
To Next Page
