3
Select and click on "small Home
Appliances".Then select and
click on "Robot Vacuum".
Make sure the WiFi LED indicator is
flashing, and check "Confirm indica-
tor rapidly blink", and click on NEXT
for network connection and on Finish
after device is added successfully.
It may take several or dozens of
seconds to connect the device to
WiFi network, depending on the
signal strength.
Rapid network distribution mode:
Reset WiFi: In case of connection timeout or before connecting another cell phone, first switch
on the device.Press and hold the button and button at the same time for more than 3
seconds, then re-connect it to WiFi network.
LILIN
88888888
To Next Page
Loading...
