Lifepro RUMBLEX MAX - Product Specifications and Features; Unit Specifications Overview; Troubleshooting Common Issues

Recovery + Fitness Collection 27
LIFETIME
WARRANTY
Lifepro Fitness creates quality, durable
exercise products and we stand by that
quality with a lifetime warranty on all of
our products. If your Rumblex Max ever
breaks (and we doubt it will), we’ll send
you replacement parts and show you
how to repair it. If your Rumblex Max
cannot be repaired, we’ll replace it—free
of charge. Register your Rumblex Max
at rumblexmax.lifeprofitness.com to
activate your warranty within 14 days of
purchase.
Recovery + Fitness Collection 27
PRODUCT SPECIFICATIONS
MADE IN CHINA
UNIT SPECS
Size: 30.7” L x 15.7” W x 5.5” H
Net Weight: 46.3 lbs
Power: 300W + 30W + 300W
Voltage: 110V
Amplitude: 0–10mm
Max User Weight: 500 lbs.
TROUBLESHOOTING GUIDE
Quickly troubleshoot simple issues you might experience using the table below. Please contact us for
additional assistance at: support@lifeprofitness.com, or (732) 456-6063.
ISSUE MACHINE DOES NOT TURN ON
CAUSE Power cable is not plugged into a wall outlet.
SOLUTION Connect power cable to an outlet.
CAUSE Power switch is not flipped to the ON position.
SOLUTION Flip the Power switch on the front of machine to the ON position.
CAUSE Power cable is not securely plugged into the front of the unit.
SOLUTION
Remove the power cable and reinsert forcefully until you hear a click indicating it is
securely connected.
ISSUE REMOTE CONTROL DOES NOT WORK
CAUSE Remote is too far away from the infrared sensor on the display.
SOLUTION
Point remote directly at infrared sensor when in use (effective distance is
approximately 6 feet).
CAUSE Batteries are installed incorrectly.
SOLUTION Check to see if the batteries are installed in the correct direction.
CAUSE Batteries are dead.
SOLUTION Replace dead batteries with two new AAA batteries.
ISSUE MACHINE STOPPED WORKING SUDDENLY
CAUSE Program (10 min run-time) or manual workout (30 min run-time max) has ended.
SOLUTION Begin a new exercise program.
ISSUE CANNOT TURN OFF MACHINE USING REMOTE CONTROL OR CONTROL PANEL
CAUSE The Rumblex Max must be powered off via the Power switch.
SOLUTION Flip the Power switch on the front of the unit to the OFF position.
Frequency: 6–14 Hz
Speed Levels: 1–99
Preset Programs: P01–P16
Batteries Required:
Two AAA battery (not included)
RUMBLEX MAX
4D VIBRATION PLATE
RECOVERY + FITNESS