LifeSpan BOLT - Page 8

8
BOLT
STEP 3:
STEP 4:
1. Erect the computer and the upright
tubes
Support the upright with your to avoid the
display falling and causing injury
1. Using the 5# Allen wrench (12), insert the
Bolt M8*45 (70) into the Lock washer
(64). Then secure the Right Upright Tube
to the Main Frame
2. Using the 5# Allen wrench (12), insert
Bolt M8*16 (64) into the Lock washer (64)
to the base frame through base and right
upright tube. Reference the picture left.
Support the upright with your to avoid the
display falling and causing injury