3. BUTTON FUNCTIONS
1. “PROG”: when the treadmill is in standby mode, this button cycles through:
a. “P1-P99” - built in programs
b. “U1-U3” - user defined programs
c. “FAT” - body fat testing mode
2. “MODE”: mode selection button. Press this button to cycle through “time count down”, “distance
count down” and “calorie count down”
a. You can adjust the value with the Speed +/- or Incline +/ - buttons. Press “START” to start
your workout after setting the values.
3. “START”: begins workout after a 3 second countdown. When the power is on and safety key
correctly placed on the computer, press this button to start the treadmill.
4. “STOP”: press button once and the machine will slow down to a stop.
Pressing the STOP once button during your workout will pause the workout and data on the LCD will
remain. Press the START button to resume your workout. Instead of pressing START, you may
clear the workout data by pressing the STOP button a second time.
5. SPEED+\SPEED-: Increase or decrease speed when excising. Sets parameter when stopped.
6. “INCLINE+”, “INCLINE-”: increase or decreases incline. Adjust the incline level during excising. Sets
parameter when stopped.
7. “SPEED: 3, 6, 9, 12, 15, 20” Speed adjustment quick buttons
8. “INCLINE: 3, 6, 9, 12, 15, 20” Incline adjustment quick buttons.
9. “FAN”: Turns the fan ON/OFF
10. “VOL+”: Increases volume during USB memory stick playback
11. “VOL-”: Decreases volume during USB memory stick playback
12. : Track selection buttons
13. : Mute Button
To Next Page
Loading...
