TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
11
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE
Locate the loop in the center of the Guy Line (EGO) and slip it over the top of
the Net Pole (DKO) as shown.
SEC
2.4
DKO
EGO
Use the Clip to secure the Net (DKP) to the top loop on the Net Pole.
SEC
2.3
Note: Repeat this step to attach the net
to the other side of the assembly.
!
DKP
Loop
Loop
Clip
Clip
To Next Page
Loading...
