Liftket B13 - Safety Advice; Regulations

5
1 Safety advice
1.1 Regulations
In the German Federal Republic and in the countries of the European Union the assembly, first use, certification and
maintenance of hoisting machines is basically regulated by the following regulations and by the instructions contained
in this Operating manual.
European Directives
2006/42/EC
EC Machinery Directive
2014/30/EG
EC Directive on electromagnetic compatibility
2014/35/EG
EC Directive on electrical equipment designed for use within certain voltage limits
Regulations of the German Professional Association (Accident Prevention Regulations)
DGUV Regulation 1 (BGV A1:2009)
Principles of prevention
DGUV Regulation 3 (BGV A3:2005)
Electrical facilities and equipment
DGUV Regulation 52 (BGV D6:2000)
Cranes
DGUV Regulation 54 (BGV D8:1997)
Winches, lifting and pulling equipment
DGUV Rules 100-500 (BGR 500-2.8:2008)
Operation of work equipment
DGUV Principle 309-001 (BGG 905:2004)
Principles of checking of cranes
Harmonized Regulations
EN ISO 12100:2010
Safety of machinery
EN 14492-2:2006+A1:2009
Cranes - Power driven winches and hoists
EN 818-7:2002+A1:2008
Chains for lifting purposes; Quality Grade T
EN ISO 13849-1:2008
Safety-related parts of control systems; General principles for design
EN 60034-1:2010
Rotating electrical machines; Rating and performance
EN 60034-5:2001+A1:2007
Degrees of protection provided by the integral design of rotating electrical
machines
EN 60204-1:2006
Electrical equipment of machines, general requirements
EN 60204-32:2008
Electrical equipment; requirements for hoisting machines
EN 60529:1991+A1:2000+A2:2013
Degrees of protection provided by enclosures (IP-Code)
EN 60947-1:2007+A1:2011
Low-voltage switchgear and control gear; general statements
EN 61000-6-2:2005
Electromagnetic compatibility, immunity for industrial environments
EN 61000-6-3:2007+A1:2011
Electromagnetic compatibility, emission standard for residential, commercial
and light-industrial environments
EN 61000-6-4:2007+A1:2011
Electromagnetic compatibility, emission standard for industrial environments
EN 82079-1:2013
Preparation of for use, structuring, content and presentation
Standards and Technical Specifications
FEM 9.511:1986
Rules for the design of series lifting equipment, classification of mechanisms
FEM 9.683:1995
Selection of hoisting and travelling motors
FEM 9.751:1998
Power driven series hoist mechanisms, safety
FEM 9.755:1993
Measures for achieving safe working periods
The manufacturing plant accepts no warranty obligation whatsoever upon non-compliance with any of the instructions
of the above safety regulations or of this Operating manual.
In other countries, the respective national regulations are to be considered.