Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
3-18 248083408-1 Rev 1
15. Type N in response to “Change telnet config password”. The
instrument is shipped without a password. Changing the telnet
password or providing one is discouraged, except for absolute
security requirements. If a password is applied and forgotten, the
instrument will have to be returned to Lighthouse to get the
password cleared.
Figure 3-17 Telnet Config Password Screen
16. Type S to Save and restart and press Enter to save the changes.
Note: When the
Ethernet restarts, it will
lose connection to the PC,
reported as, “Connection
to host lost”.
Figure 3-18 Saving the Settings
17. Perform Step 7. though Step 16. for each REMOTE P.
To Next Page
Loading...
