Lighthouse Remote 5014P - Communicating with the Instrument

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
4-4 248083408-1 Rev 1
Communicating
with the
Instrument
The RJ-45 connector on the instrument (marked “RS-485” in
Figure 4-3) is used to connect the unit to a COM port on a desktop or
laptop PC.
Figure 4-3 The Communications Ports, Showing Pin Numbers
1 1 1 0 1 0 23 1 1 1 0 1 1 55
0 0 0 1 1 0 24 0 0 0 1 1 1 56
1 0 0 1 1 0 25 1 0 0 1 1 1 57
0 1 0 1 1 0 26 0 1 0 1 1 1 58
1 1 0 1 1 0 27 1 1 0 1 1 1 59
0 0 1 1 1 0 28 0 0 1 1 1 1 60
1 0 1 1 1 0 29 1 0 1 1 1 1 61
0 1 1 1 1 0 30 0 1 1 1 1 1 62
1 1 1 1 1 0 31 1 1 1 1 1 1 63
Table 4-2 DIP Switch Addressing
DIP SWITCHES
1 2 3 4 5 6
ADDRESS
DIP SWITCHES
1 2 3 4 5 6
ADDRESS
8
1