EasyManua.ls Logo

Lightspeed Sierra - ComPriority

Lightspeed Sierra
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
toothpick to slide the DIP switch to ON or OFF
depending on your preference.
ComPriority
ComPriority is turned on or o by the bottom-most
controller button. With ComPriority on and when
radio communications are detected, the volume of
auxiliary devices will be signicantly reduced.
To enable ComPriority, turn on the feature, plug
into your intercom and talk into the headset
microphone while playing music over a wired
device; see Wired Auxiliary Devices in the next
section. If enabled, your auxiliary music volume
will decrease when you start to talk. During cell
phone calls, the other party will be muted, so
disable ComPriority before making calls.
9
Wired auxiliary devices
To connect a music player or cell phone to Sierras
auxiliary input jack, use the cord provided.
IMPORTANT: To use a cell phone via the auxiliary
input jack, the headset must be connected to
the intercom.
To adjust the volume on a device connected to
Sierras auxiliary input jack, use the controls on
the device itself.
Using Your Sierra Headset

Related product manuals