11
Your Bluetooth wireless technology enabled
device should now be paired and ready for
continued use with Sierra.
Bluetooth mode—ON and OFF
ON: With Sierra turned ON, press and hold the
Bluetooth button (see page 7) until you hear
a high tone and the Bluetooth indicator LED
ashes three blue pulses. For rst time pairing
see instructions on page 10.
OFF: Press and hold Sierra’s Bluetooth button for
about three seconds until a high tone is emitted
and the Bluetooth indicator LED ashes three
red pulses.
Note: The Bluetooth wireless technology feature
must be turned ON for devices with Bluetooth
wireless technology to correctly function.
When you turn on the Sierra Bluetooth mode it
will connect to the most recently paired device.
Most Bluetooth wireless technology devices
connect to Sierra automatically. If that doesn’t
happen it may be necessary to use the device’s
menu of found devices to manually connect to
Lightspeed-V### (numbers may vary).
Note: The headset mic will not work with phone
calls unless plugged into the intercom.
Bluetooth Wireless Technology Enabled Devices
To Next Page
Loading...
