Getting Started
Fitting your headset
Fitting your headset properly is the key to
comfortable use and superior Active Noise
Reduction (ANR) capabilities. To gain peak
performance from the ANR feature it’s necessary
to have a solid seal around your entire ear
combined with a symmetrical t on your head.
The following tips will assist in achieving the
proper t.
A. Fit your ears entirely within the ear cups
providing a solid seal.
B. Rest the headband lightly on top of your
head with the right and left sliders extended
to equal lengths.
C. Position the microphone inch from your
mouth, with the gain adjustment cap facing
away from you (visible when you remove the
mic mu).
Note: The microphone will not transmit unless
plugged into an intercom.
4
This side of the microphone
should face away from you.
To Next Page
Loading...
