3
Do not attempt to use directly with Line Voltage (120 VAC or higher),
DC (Direct Current), millivolt (thermopile), or proportional control
systems. A transformer and relays must be used to interface with
these types of systems. The Lightstat TME is designed for 24 VAC
systems only.
Pick a mounting location AWAY from drafts, windows, doors,
outside walls, and heat vents. Relocate if necessary.
The Lightstat TME senses a change in LIGHT LEVEL to determine
Setback. Mount it under lights that GO OFF when people GO
HOME. Locate the Lightstat TME at least 10 feet from a night light.
To Next Page
Loading...
