LIMBACH L 2000 EA - Every 100 Operating Hours; Every 250 Operating Hours; Every 500 Operating Hours

Page: 27/48
Operating Manual L 2000
Edition: 01.03.2016
201.253.
905.000
7.3.5 Every 100 Operating hours
 Check carburetor diaphragm of the Stromberg-Zenith carburetor.
 Check magneto timing and adjust, if necessary.
 Clean fuel pump screen.
 Work as specified in section 7.3.4
7.3.6 Every 250 Operating hours
 Disassemble and check magneto(s) and replace as necessary (SLICK Magnetos only).
 Work as specified in section 7.3.4
7.3.7 Every 500 Operating hours
 Disassemble and check magneto(s) and replace as necessary (BENDIX Magnetos only).
 Replace float valve.
 Check play of throttle shaft (L 2000 EB only).
 Check valve shaft projecting length.
 Work as specified in section 7.3.4
 Work as specified in section 7.3.5
 Work as specified in section 7.3.6