LIMBACH L 2000 EA - Recommended Tightening Torques

Page: 43/48
Operating Manual L 2000
Edition: 01.03.2016
201.253.
905.000
11 Recommended Tightening Torques
Oil screen cover to housing
7 Nm
Oil drainage screw to oil screen cover
35 Nm
Air filter to carburetor (M8)
20 Nm
Carburetor to induction pipe
20 Nm
Carburetor cover to carburetor
2 Nm
Fuel bowl to carburetor
2 Nm
Float valve to carburetor
12 Nm
Diaphragm to regulator piston
1 Nm
Crankcase ventilation to case
20 Nm
Spark plug to cylinder head
25 Nm
Ignition harness to spark plug
10 Nm
Nut of valve clearance setscrew
15 Nm
Cover to fuel pump
2 Nm
Clamp to alternator (M6)
8 Nm
Clamp to alternator (M8)
20 Nm
Clamp to case
20 Nm
Alternator to case
45 Nm
Magneto to housing
20 Nm
Exhaust flange to cylinder head
20 Nm
Engine support to case (M10)
45 Nm
Grounding wire to magneto (Slick)
1,5 Nm