Page 35
Troubleshooting
Problem D: Pump is loud
Instructions:
1. Ok to use but needs to be serviced.
Helpful tips:
• If pump caused pain or discomfort, immediately pull the lter
(9) on page 23 off of the pump to release the vacuum, then
press the cycle speed/power knob to turn it off. Should the
cup remain stuck with suction to your breast after you have
removed the lter and turned off the power, insert your nger
between the cup and your breast to break the seal.
• If pump suddenly stops, check outlet plug to be sure it’s
securely plugged into the electrical outlet. Also check to be
sure the plug is inserted properly into the back of the pump
and make sure the extension cord is tightly plugged into the
transformer.
• For other difculties, contact Limerick, Inc. for assistance.
• You may also try calling the location where you obtained your
breast-feeding product.
• Before use, visually inspect pump for cracks, chips, or
deterioration. In the event that damage to the device has
occurred, discontinue use and return to Limerick.
• Limerick will perform all preventive maintenance and
recalibration when necessary. There are no user-serviceable
parts inside.
To Next Page
Loading...
