Recommendations
• Charge the battery fully before first use.
• Adhere to the battery storage temperature or else the lifetime and performance will be reduced.
• Allow the battery to settle to room temperature before use or charging.
• Only use correct LINAK charger (CHJ2, CH01, integrated charger in JUMBO control box or COBO).
• Adhere to the duty cycle or else the lifetime and performance will be reduced.
• BAJL is intended for use in indoor applications, however not in indoor pool environments.
• Recharge the battery before storage if it has been completely discharged.
• Unintentional use of the emergency button, for instance short activation and deactivation of the
emergency button after operating the actuators, can lead to an error indication of remaining battery
capacity. The battery capacity will however be shown correctly approx. 20 seconds after activation of the
emergency button.
• The BAJL goes into sleep mode approximately 20 seconds after the CBJ Care enters into sleep mode.
If the CBJ Care is reactivated within this period, it can lead to a wrong remaining battery capacity
indication. The remaining battery capacity will, however, be shown correctly approx. 20 seconds after the
reactivation of the CBJ Care.
Safety feature
BAJL contains several mechanisms to protect itself from being damaged due to excessive use.
In case of overheating, the device will activate a thermal protection. No power output will be available until
the temperature has returned to normal operating range.
Overheating may occur by extensive use at high temperature or by exceeding the duty cycle.
Battery safety
LINAK li-ion batteries for medical use are designed and manufactured to be safe through the product
lifetime. LINAK has performed various tests of the batteries in normal use, abuse situations and failure
situations to verify the design and production methods. These tests have not shown any unacceptable risks.
The batteries are also UL-tested to have an independent organisation verify the safety of the design and
to obtain a safety certificate. This means that UL regularly inspects the factory to check that standards are
complied with.
UL has tested in accordance with the following standards:
UN38.3, 6th edition - Battery Transportation Safety
IEC62133 Battery Safety
UL2054, 2nd edition - Standard for Household and Commercial Batteries
To Next Page
Loading...