Need help?Do you have a question about the Linar Audio 10 and is the answer not in the manual?
Safety precautions include avoiding moisture, maintaining grounding, and not removing the cover to prevent electrical shock.
Details the six single-ended inputs: CD, Tuner, AUX1, AUX2, AUX3, and TAPE IN. AUX1 is for 5.1 surround sources.
Describes TAPE OUT for cassette decks and SUB OUT for subwoofers, detailing mono output for stereo and 5.1 sources.
Explains the five separate speaker connections (Front L/R, Center, Rear L/R) and proper wire connection for phase alignment.
Instructs to use the supplied IEC AC power cord and plug it into the AC wall receptacle.
The front panel Lexan window houses a green backlight LCD displaying source and volume settings with embedded control buttons.
Pressing the Input selector scrolls through CD, TUNER, AUX1, AUX2, AUX3 inputs. Inputs are also directly accessible via remote.
Use the Power button to switch the amplifier on or off. Press once to turn on, press again to return to standby.
The MONITOR button selects TAPE input and outputs signal via TAPE OUT for listening to sources or monitoring recordings.
Volume Up/Down buttons control output level for all channels. Display shows volume levels with 32 segments per bar.
Press the POWER button to switch the amplifier from standby to operating mode, and vice versa.
The REAR VOL button switches volume control between main, rear, and subwoofer channels for adjustment.
ST IN 4 CH button enables Stereo in 4 Channel function, feeding front channel music to both front and rear channels.
Pressing MUTE reduces output level to barely audible. Pressing again restores the previous volume setting.
Pressing DISPLAY turns off the front panel illumination. Pressing again turns the illumination back on.
Buttons select listening sources connected to the amplifier's corresponding inputs.
Vol ▲ or ∇ buttons increase/decrease overall volume. Two bars move right as volume increases, showing 32 levels.
Selecting AUX1 changes volume mode to 5.1. Vol ▲ or ∇ controls Center/Rear channels alongside main and subwoofer.
Pressing REAR VOL allows temporary adjustment of Rear Channels volume separately using Vol ▲ or ∇ buttons.
Pressing REAR VOL twice allows temporary adjustment of Subwoofer volume separately using Vol ▲ or ∇ buttons.
Operates in 2-channel stereo mode for CD, Tuner, AUX2, AUX3 inputs, amplifying front left/right channels. Subwoofer also operates.
Operates in 5.1 Channel Mode via AUX1 input, amplifying all channels for SACD, DVD-Audio, or surround sources.
ST IN 4 CH button feeds source signal to front and rear channels for 4-channel playback of the same source.
Allows bi-amplification of main speakers in a 2-channel system by connecting speaker cables to specific inputs.
General| Brand | Linar Audio |
|---|---|
| Model | 10 |
| Category | Amplifier |
| Language | English |
To Next Page