To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric POWER MIG 211i and is the answer not in the manual?
General| Input Phase | Single Phase |
|---|---|
| Output Amperage Range | 30 - 210 A |
| Processes | MIG, Flux-Cored |
| Duty Cycle | 30% at 210A |
| Wire Feed Speed Range | 50 - 700 IPM |
| Wire Size Range | .030 - .045 in |
State warnings about chemicals known to cause cancer, birth defects, or reproductive harm.
Warnings about serious injury or death from arc welding, children, and pacemakers.
Safety guidelines for operating engines, ventilation, fuel handling, and moving parts.
Hazards of EMF fields, interference with pacemakers, and minimizing exposure.
Details on duty cycle, input voltage, current, and welding processes.
Controls for wire feed speed and voltage selection.
Warnings regarding electric shock, fumes, sparks, and arc rays during installation.
Guidelines for connecting input power and grounding per electrical codes.
Step-by-step instructions for starting and configuring the welder.
Explanation of the three-step process for diagnosing problems.
Safety procedure for discharging capacitors before servicing.
Diagnosing problems with physical damage, no output, or fan operation.
