Name: Lincoln Electric Torchmate 4800
Brand: Lincoln Electric
Rating: 5 (1 reviews)

To Next Page

Replacing the 4x00 X-Axis Motor Belt

DOC #:7301-0-US70-111318-AM-01-02

support@torchmate.com

Replacing the 4x00 X-Axis Motor Belt

Intro:

Over me, the ming belts on the 4400 and 4800 machines that join the

motor and pinion gear pulleys will wear out and require replacements. The

instrucons below explain the procedure for replacing the belts.

Tools:

 1/8 Allen Wrench

 3/16 Allen Wrench

 9/64 Allen Wrench

 5/64 Allen Wrench

 1/4 Allen Wrench

 (1) Zip Tie

Warning:

BEFORE BEGINNING, PLEASE POWER OFF ALL EQUIPMENT INCLUDING THE

ACCUMOVE CONTROLLER!*

*Irreparable damage will occur to the controller and will not be covered

under warranty if the equipment is not turned o.

Part 1:

Removing the plasma torch shown in Fig. 1.

Fig. 1: Plasma torch.

Other manuals for Lincoln Electric Torchmate 4800

Questions and Answers:

Need help?

Do you have a question about the Lincoln Electric Torchmate 4800 and is the answer not in the manual?

General