To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric Vantage LE400 and is the answer not in the manual?
General| Model | Vantage LE400 |
|---|---|
| Max Output | 400 A |
| Rated Output | 400A/36V/100% Duty Cycle |
| Engine Power | 24.8 HP (18.5 kW) |
| Engine Speed | 1800 RPM |
| Fuel Type | Diesel |
| Type | Engine Driven Welder |
| Processes | Stick, TIG, MIG, Flux-Cored |
| Output Range | 20-400 Amps |
| Output Current Range | 20 - 400 A |
| Input Power | N/A (Engine Driven) |
| Input Current | N/A (Engine Driven) |
Emphasizes operator responsibility for safe installation, operation, and maintenance of equipment.
Details essential personal protective equipment (PPE) for welding, including eye, ear, and body protection.
Addresses dangers of electric shock, arc rays, and fumes from welding processes.
Highlights risks associated with welding sparks, cutting, and potential cylinder explosions.
Critical safety warnings for personnel installing the equipment, including electrical and mechanical hazards.
Details essential checks for engine oil, fuel, cooling system, battery, and exhaust components.
Reinforces critical safety measures to be followed during the operation of the welding equipment.
Detailed explanation of the various controls and their functions on the welding machine panel.
Instructions and settings for performing stick welding using the CC-STICK mode.
General safety guidelines to be followed by personnel performing maintenance tasks.
Schedule and notes for routine engine maintenance based on operating hours.
Addresses common problems like engine not cranking, not starting, or shutting down shortly after starting.
Covers troubleshooting for no welding output, loss of control, and wire feeder connection problems.
