Page Number - 2
Form 420135
Model 1340
LEVER ACTION PUMP
DESCRIPTION
- PREMIUM POWDER COATED STEEL PUMP BODY
- ALUMINIUM DIE CAST PUMP HEAD
- BUILT-IN 1-1/2” & 2” BUNG FOR USE ON DRUMS WITH EITHER OPENINGS
- BUILT-IN 56 MM x4 MM BUTTRESS THREAD FOR PLASTIC DRUMS
- PLATED STEEL LEVER HANDLE WITH RUBBER GRIP
- ZINC DIE CAST PISTON
- WEAR RESISTANT BRASS PISTON RINGS
- TELESCOPIC SUCTION TUBE FOR USE ON 16 GALLON (61 LITRES) & 55 GALLON (205 LITRE) BARRELS
- OUTLET DISCHARGE SPOUT HAS A BUILT-IN ALUMINUM DIE CAST NON DRIP ATTACHMENT.
- OUTLET SPOUT CAN BE REMOVED TO ALLOW ATTACHMENT OF A GARDEN HOSE.
- OUTLET SPOUT HAS A WELDED STEEL HOLDER WHICH PERFORMS A DUAL ROLE:
1) COVER OUTLET WHEN PUMP IS NOT IN USE.
2) HOLDER FOR HANGING BUCKETS/CONTAINERS.
WETTED COMPONENTS
STEEL, ALUMINUM, ZINC, BRASS & VITON
SPECIFICATIONS:
OUTPUT APPROXIMATELY .44 QUART (414ML)\STROKE
SUITABLE FOR USE WITH:
ANTIFREEZE
SOLVENTS
THINNERS
AUTOMOTIVE ADDITIVES
INDUSTRIAL CHEMICALS
OIL BASED FLUIDS
NON CORROSIVE LIQUIDS
NOT SUITABLE FOR USE WITH:
WATER BASED FLUIDS
CORROSIVE LIQUIDS
GASOLINE
VOLATILE LIQUIDS
To Next Page
Loading...
