Lincoln PMA - 2 - Safety Instructions; Table of Contents

2.1A-88002-C06
Page 2 of 15
LINCOLN GmbH & Co. KG • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
User Manual
Magnetic Pump PMA-2
Subject to change without notice
Page
Table of contents ........................................................... 2
Safety instructions ........................................................ 2
Fields of application ...................................................... 3
Structure ......................................................................... 3
Operation ........................................................................ 4
Specifications of the installation site............................ 4
Electric connection ......................................................... 4
Erection and installation ............................................... 4
Operating instructions.................................................. 4
Start-up............................................................................. 4
Connection of tube lines and filling of pump......... 4
Venting ....................................................................... 4
Table of Contents
Page
Maintenance and Repair................................................ 4
Troubleshooting.............................................................. 5
Technical Data................................................................ 5
Switch times .................................................................... 7
Electric equipment.......................................................... 7
Identification Code.......................................................... 9
Dimensions................................................................... 10
Accessories .................................................................. 11
Single parts of magnetic pump PMA - 2 ................... 13
Arrangement of outlets................................................. 14
Installation of proximity switch .................................... 14
Declaration of manufacturer ........................................ 15
Operation of the Magnetic Pump
• The magnetic pump should only be used if it is in good
technical condition.
• Defects and faults which may impair its operation and
safety must be remedied immediately.
• The reservoir must be refilled in due time with clean oil.
• Should you need more information than is given in this
User Manual, please contact our company (see address
below).
• The PMA-2 magnetic pump is exclusively designed for
use in centralized oil lubrication systems.
• The limiting values specified in the Technical Data,
particularly in the maximum operating pressure and the
maximum frequency, must on no account be exceeded.
• Any other use is not in accordance with the specified
instructions.
• The manufacturer is not liable for damages resulting
from improper use.
Maintenance and Repairs
• Before any maintenance or repair on the magnetic pump
is done, the User Manual and the Safety Instructions
must be read.
• The User Manual must be available on the site where the
pump is in operation.
• Alteration or modifications of the magnetic pump are only
allowed if approved by the manufacturer.
• For repairs use only original Lincoln spare parts.
• If other spare parts are used, the manufacturer may be
released from its liability for the resulting consequences.
Appropriate Use
Safety Instructions