Lindo LVD01 - Option 1 - Connect the doorbell with a mechanical chime

10.5 Option 1 - Connect the doorbell with
a mechanical chime
What you need: Wires and Wire Nuts (Optional), Video Doorbell,
Philips-head Screwdriver
Connect the wires to the terminals at the back of the doorbell, then
tighten the terminal screws.Wire can connect to any terminal.
Dual-Cam Video Doorbell 2K
(Model : LVD01)
Extension Wires and
Wire Nuts (Optional)
Phillips-Head Screwdriver
(not provided)
To prevent short-circuiting, make sure the wires are not touchingeach other after
connecting them to the terminals.
If the wires are too short, use the extension wires and wire nuts provided to make
them longer. Use electrical wiring tape instead if there is no more space on the wall
for wire nuts.
32