Lindo LVD01 - Option 3 - Connect the doorbell directly to a transformer

What you need: Wires and Wire Nuts (Optional), Wirewound Resistor,
Video Doorbell, Philips-head Screwdriver
10.5 Option 3 - Connect the doorbell directly
to a transformer
Connect the doorbell directly to a transformer without mechanical
or digital chime.
Connect the wires to terminals at the back of the doorbell, then tighten
the terminal screws. Wire can connect to any terminal as the electric
current is alternating current. If the doorbell wires are too short, use
the provided extension wires.
47 Ohm
50 Watt
Wrewound Resistor
Dual-Cam Video Doorbell 2K
(Model : LVD01)
Extension Wires and
Wire Nuts (Optional)
Phillips-Head Screwdriver
(not provided)
Extension Wires and
Wire Nuts (Optional)
35