Need help?Do you have a question about the Linear eMerge 50P and is the answer not in the manual?
General| Brand | Linear |
|---|---|
| Model | eMerge 50P |
| Category | Control Systems |
| Language | English |
Provides guidance on additional publications for post-installation information.
Covers installer notes, cautions, and disclaimers for system installation.
Outlines system overview, topology, requirements, and environmental considerations.
Instructions and diagrams for physically mounting the eMerge cabinet to a wall.
Procedure for installing application extension blades into the eMerge cabinet chassis.
Explains how blade slot numbers are assigned based on ribbon cable connectors.
Instructions for connecting Wiegand readers to the access control blade.
Details the 7-pin connector wiring for readers and blade input/output ports.
Guides on wiring dry contact inputs and their supervision types.
Explains connecting inputs to access control or input blades using 2-pin connectors.
Defines input supervision methods using resistors (NO/NC, parallel/series) and lists circuit types.
Instructions for wiring output devices, specifying DC/AC powered configurations.
Details connecting outputs to access control or output blades using 3-pin connectors.
Guides on connecting temperature sensors to temperature blades.
Explains identifying temperature blades and connecting sensors via 2-pin connectors.
Procedure for connecting the eMerge system to the network using an Ethernet cable.
Instructions for connecting the Plug-in-Power supply (PIP) or a DC power source.
Instructions for installing a battery backup for system power continuity.
Procedure for creating a dedicated network for initial system configuration.
Covers controller layout, LEDs, beeps, and blade management for diagnostics.
Explains system status LEDs, beep codes, and blade indicators for diagnostics.
Guide to using Power, Reset, and Revert buttons for system operation and default resets.
Details environmental, power, wiring, reader, camera, and sensor specifications.
Outlines maximum system capacities and minimum configuration requirements.
To Next Page