No survey data is saved when no PN is input.
Press [F4] [EDIT] to edit the PN, Point Name, PH, Prism Height and PC, Point Code.
Input your desired Point Name, Prism Height and Point Code.
Press [F5] [ACCEPT] if the current PN, PH and PC are
acceptable.
If Point Code exists, you can easily select them from the list
or edit one of them after pressing [ENT]. For using Point
Code List, please refer to “8.3.1 Point Code”.
Press [F5] [PAGE] to view another menu.
Press [F3] STATION can alter the station information, please refer to 9.1.
EDM settings can be selected by pressing [F1]
[EDM].
For example, change 1.PRIM. MEAS KEY (MEAS)
to TRACK SHOT or TRACK CONT if you want to
use tracking measurement with primary MEAS key
(MEAS).
The target type can be selected by pressing [F2] [TARGET].
Coordinates display and Angle & Distance display
1) Press [F5] [PAGE] twice to view [F3] [ANG & DIST].
2) Press [F3] [ANG & DIST] to view [F3] [COORD.] and Angle and Distance values.
3) Press [F3] [COORD.] to view [F3] [ANG&DIST] and Coordinates.
Stake Out can be selected by pressing [F4] [STAKEOUT].
7.2 Polar Coordinates
86
To Next Page
Loading...
Need help?
General
