5.5.4 Action Method Selection
Select 4. ACTION METHOD and press [ENT] to
view the following screen. Press the down arrow
key to choose and press [ENT] to enter.
Process type
This input method takes over the functionality of
“LinertecExpress”. When this option is
selected, the next screen will be shown after
inputting necessary items.
Structure type
This input method takes over the functionality of our
past product. When this option is selected, the menu
screen will be shown after inputting necessary items.
5.5.5 Remote method selection
Select 5.REMOTE METHOD and
press [ENT] to view the following
screen. Press the down arrow key to choose and
press [ENT] to enter.
50
1.Cylinder face
Reference P. Coordinates
2.Fixed plane
3.Rotated plane
Station Point Coordinates
REMOTE
To Next Page
Loading...
Need help?
General
