Linhai LH40DA - Front;Rear A-arm and Steering Bushing Lubrication; Wheel Bearing and Tie Rod Maintenance; Prop Shaft, Yoke, and Throttle Lubrication

LH40DA OWNER’S/OPERATOR’S MANUAL 18.0
12. MAINTENANCE
12- 8
Lubrication Recommendations
Item
Lube Rec
Method
Frequency

6. Front/Rear
A-arm
pivot Shaft
Grease
Locate fitting on
pivot shaft and
grease with grease
gun
Every 3
months or 50
hours

7.Steering
Post Bushings
Grease
Locate fitting on
pivot shaft and
grease with grease
gun
Every 3
months or 50
hours

8.Front/Rear
Wheel
bearings
Grease
Inspect and
replace bearings if
necessary
Semi-annually
9.Tie rods
Grease
Locate fittings
and Grease
Semi-annually
10.Front/Rear
Prop Shaft &
Shaft Yoke
Grease
Locate fittings
and Grease
Semi-annually

11.Ball joints
Inspect
Inspect and
replace it if
necessary
Semi-annually

12.Prop Shaft
＆Shaft Yoke
Grease
Locate fitting and
Grease
Semi-annually

13.Throttle
Grease M
Grease, inspect
Monthly or 20