Linkplay A31 - WPS Setting; Restore to Factory Setting

Doc Title Wireless smart audio module
Number
WMB20150921
Version
1.
4
Document No.: WMB20150921 Page 21 of 21
XON/XOFF None
3.6. WPS Setting
WPS (Wi-Fi Protected Setup) is used to simplify the Wi-Fi setup. Working with WPS enabled router, user doesn’t
need choose the Wi-Fi SSID and enter password. Instead, user just needs press the button (PBC mode) and it will
join the network safely.
To enter the WPS mode, keep low pulse ( 300ms < t <5s) for “nReload” pin in A31 module.
3.7. Restore to factory setting
To restore the factory setting for the module, keep low pulse for t >5s for “nReload” pin in the A31 module. When
the factory setting is restored, the system will reboot automatically.