24
3.
If you are prompted to enter a network security key, type your password (security key) into
the network security key field. Click OK.
4.
Your computer will connect to the extended network, and you should be able to access the
range extender’s settings interface.
*Depending on your version of Windows, there could be some differences in wording or icons in
these steps.
To fix the problem on Mac computers, do the following:
1.
In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks
will appear.
2.
In the example below, the computer was connected to another wireless network named
wraith_5GHz. Your extended network name, Damaged_Beez2.4_Ext in this example, is
shown selected.
3.
Click the extended network name of your range extender (Damaged_Beez2.4_Ext in the
example).
4.
Type your wireless network password (Security Key) into the Password field. Click OK.
To Next Page
Loading...
Need help?
General
