Linksys AC3000 User Manual

7
2. Wait for the light on the front of your range extender to blink orange before going to
step 3. This can take up to a minute.
3. Extend your network.
Press the WPS button on your router. Within the next two minutes press the WPS
button on the side of your range extender.
The WPS button will light up and the light on the top of your range extender will blink
green.
Watch the light on the top of your range extender to verify whether the connection was
successful.
If it turns solid green , the connection was successful. Move to step 4.

Linksys AC3000 Specifications

General

Brand	Linksys
Model	AC3000
Category	Extender
Language	English