109
Factory Default
It’s highly recommended you save your current configuration file before you restore to factory
default settings. To save your current configuration file, click Maintenance > Configuration
Backup/Restore.
Factory Default
To restore your access point to its factory defaults,
select an option and click Save.
•
Reset All Parameters to Factory Default
•
No
Don’t restore to factory defaults.
Reboot
Go to Maintenance > Maintenance > Reboot to power cycle the device. The current configuration
file will remain after reboot.
Device Reboot
If you click Save when the Yes
radio button is
selected, the device will power cycle.
To Next Page
Loading...
