Linksys LAPAC1200C User Manual

108
Backup/Restore to/from Local PC
Backup
Configuration
Once you have the access point working properly, you
should back up the settings to a file on your computer.
You can later restore the access point's settings from
this file, if necessary.
To create a backup file of the current settings:
•
Click Backup.
•
If you don't have your browser set up to save
downloaded files automatically, locate where
you want to save the file, rename it if you like,
and click Save.
Restore
Configuration
To restore settings from a backup file:
1. Click Choose File.
2. Locate and select the previously saved backup
file.
3. Click Restore.
Backup/Restore to/from TFTP server
Backup
Configuration
To create a backup file of the current settings:
1. Enter the destination file name you plan to save
in TFTP server.
2. Enter the IP address for the TFTP server. Only
IPv4 addresses are supported.
3. Click Backup.
Restore
Configuration
To restore settings from a backup file:
1. Enter the source file name stored in TFTP
server.
2. Enter the IP address for the TFTP server. Only
IPv4 addresses are supported.
3. Click Restore.

Linksys LAPAC1200C Specifications

General

Color	multi, white
Wi-Fi Speed	1200 gigabits per second
Wireless Standard	ac, n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	802.1x supplicant; mac-based acl; rogue ap detection; ssid-to-vlan mapping
Ports	other, rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.12 pounds